Air Vent from Steam Lines

Air Vents for Steam Lines: Corrosion Protection and Efficient Steam Systems

In industrial steam systems, the presence of air can lead to significant problems. Air can cause corrosion, lower steam temperatures, and reduce system efficiency. At ORFA Industrial Products Industry and Trade Inc., we help you overcome these problems by offering air vent solutions that automatically remove air from steam lines.

Why does air cause problems in steam systems?

Air is present in the main steam system and equipment during initial commissioning. When the steam supply is interrupted, air re-enters the system. The main problems caused by air in steam systems are as follows:

• Corrosion: Air dissolves in the condensate water and returns to the boiler, causing corrosion in pipes, valves, and other equipment. This shortens the system's lifespan and increases maintenance costs.
• Temperature Drop: The air in the system lowers the temperature of the steam. This reduces heat transfer efficiency and leads to energy waste.

Air Vent Solutions for Steam Lines:

ORFA Industrial offers automatic thermostatic air vents to solve these problems. These devices automatically vent air from the main steam lines at the end of the line. Their operating principle is as follows:

• The cold air and damp steam mixture is expelled.
• The system shuts itself off when the mixture approaches a temperature close to its vapor temperature.

Air Vent from Steam Lines:

ORFA Industrial's steam line air vents, which it sells, are also thermostatic condensate traps, and are a particularly suitable type of air vent for low-pressure environments. The features of these devices are as follows:

• The body is made of brass, while all other internal components are made of stainless steel.
• It can be easily used, especially in the garment and textile industry, in steam radiators and low-pressure steam units.
• In addition to automatic air venting, it provides intermittent or continuous draining depending on the condensate load.
• The difference between an air vent in steam lines and a condensate trap is that its body is of the angular type.

Air Vent Installation and Maintenance in Steam Lines:

Air vents for steam lines can be connected to the pipeline in any position to ensure efficient and long-lasting operation. Suitable isolation valves must be installed to ensure safe maintenance and condensate trap replacement procedures.

Structure and Technical Specifications of Air Vent Materials in Steam Lines:

The material structure and technical specifications of the Air Vent for Steam Lines sold by ORFA Industrial are as follows:

• Body and Lid: Brass
• Internal Components: AISI 304 Stainless Steel
• Connections: Gear
• Nominal Diameter: DN15 (1/2”)
• Pressure ratings: Up to a maximum of 10 bar.
• Operating Temperature: Maximum operating temperature 150 ºC

Applications of Air Vents in Steam Lines:

Air Vents for Steam Lines are particularly suitable for the following applications:

• Irons
• Radiators

ORFA Industrial Difference:

ORFA Industrial Products Industry and Trade Inc. offers reliable and efficient solutions for industrial steam systems. Our sales team, prioritizing customer satisfaction, is always ready to understand your project requirements and offer you the most suitable products.

Conclusion:

ORFA Industrial's air vents solve problems caused by the presence of air in steam systems, increasing efficiency, preventing corrosion, and saving energy.